To the content

sempermed® supreme plus

OPTIMAL GRIP IN EVERY SITUATION: A latex surgical glove with micro-rough surface for dry and damp applications, skin-friendly, powder-free with quick-don™ synthetic inner coating.

Find distribution partner


Optimal grip in every situation:
The sempermed® supreme plus is a great choice for good instrument handling with optimum safety and excellent tactile sense.


    The specifically developed and automated finishing process contains intensive and multiple washing cycles. Skin-irritating substances from the production process and the natural latex protein concentration are thereby reduced to the technically lowest level.
    The special net-like lining structure optimises the contact surface between the film and the skin, thus considerably reducing the friction resistance when putting on the glove. The result: The new sempermed® supreme plus facilitates easy donning of the gloves.
    For your safety and easy donning use sempermed® supreme as underglove and sempermed® supreme plus as outer glove. Our recommendation:  If you wear different sizes, put on the larger pair first. Or use gloves of the same size.



Sterile surgical glove for single use, with synthetic inner coating


Natural Rubber (NR) 

Internal finish

Powder-free polymer coated

Glove surface



Natural white

Glove Shape

Fully anatomical with curved fingers and rolled rim


Overall length as per EN 455-2
5 ½, 6 and 6 ½            min. 270 mm
7, 7 ½ and 8                min. 280 mm
8 ½ and 9                    min. 285 mm

Wall thickness

Measured in double layer in the palm area
0.44 +/- 0.05 mm

Barrier performance

Tightness as per EN 455-1
AQL 0.65 

Force at break

as per EN 455-2
median ≥ 12 Newton 


in original packaging if stored as per ISO 2230
3 years




EN 1041, EN 455, EN 420, EN 421, EN 374, ISO 15223


Left and right glove with turned up cuff in inner pouch, ozone-tight, sealed in medical peel pack.
In dispenser carton with sterilisation indicator: 50 pairs
In transport carton with sterilisation indicator: 300 pairs


  • Medical device class IIa as set out in MD Directive 93/42/EEC
  • Single use protective glove – PPE category III (protection against chemical substances for limited time*) as set out in PPE Regulation (EU) 2016/425 


*Please note that all Sempermed products must be used in accordance with the Sempermed chemical resistance and the respective declaration of conformity.

Failure to observe this information, in particular with regard to chemical resistance, frequency of use and tolerability of the gloves, can result in personal injury and/or material damage. Sempermed is not liable for incorrect use of the gloves nor will Sempermed be liable for improper storage and handling. In case of indications of damage or unusual signs of wear and tear to the gloves, the gloves should not be used. In case of any doubt, expert advice should be sought before use. This information and classification is up to date as of the date of the last update to this page. Technical details are average values from production and may vary in individual cases. This disclaimer is subject to mistakes, printing errors and amendments.

This product contains accelerators of Dithiocarbamate types. These products should not be used if hypersensitivity of these substances exists. For further information, a list of substances contained in the glove is available upon request.

CAUTION: Natural latex can cause allergic reactions, including anaphylactic shock. Sempermed bears no liability for allergic reactions.


To the main navigation
Back to Surgical Gloves