To the content

Sempermed® Syntegra green

THE INNER GLOVE FOR HIGH-RISK PROCEDURES: The non-latex polyisoprene green surgical underglove for double gloving with latex properties. It is powder-free and latex-free with a special synthetic quick-don™ inner coating.

Find distribution partner

Description

For improved safety – the ideal inner glove:
The green colour facilitates the detection of a glove perforation during operating procedures. This polyisoprene glove in combination with the Sempermed® syntegra IR is the optimum glove solution in respect of skin friendliness and comfort.

Benefits

  • FREE FROM NATURAL RUBBER LATEX
    Synthetic polyisoprene benefits surgeons, surgical staff and patients, free from allergenic proteins, powder-free. 
     
  • MAXIMUM SAFETY
    In particularly critical situations, Sempermed recommends wearing two pairs of gloves on top of each other. 
     
  • TACTILE SENSE
    Like natural rubber latex gloves.

Specifications

Type

Sterile surgical glove for single use, with synthetic inner coating

Material

Synthetic polyisoprene, free from natural rubber latex

Internal finish

Powder-free polymer coated

Glove surface

Smooth

Colour

Green

Glove Shape

Fully anatomical with curved fingers and rolled rim

Size

Overall length as per EN 455-2
5 ½, 6 and 6 ½            min. 270 mm
7, 7 ½ and 8                min. 280 mm
8 ½ and 9                    min. 285 mm

Wall thickness

Measured in double layer in the palm area
0.43 +/- 0.05 mm

Barrier performance

Tightness as per EN 455-1
AQL 0.65 

Force at break

as per EN 455-2
median ≥ 12 Newton 

Durability

in original packaging if stored as per ISO 2230
3 years

Sterilisation

Irradiation

Labeling & CONFORMITY TO STANDARDS

EN 1041, EN 455, EN 420, EN 421, EN 374, ISO 15223

Packaging

Left and right glove with turned up cuff in inner pouch, ozone-tight, sealed in medical peel pack.
In dispenser carton with sterilisation indicator: 50 pairs
In transport carton with sterilisation indicator: 300 pairs

INTENDED PURPOSE

  • Medical device class IIa as set out in MD Directive 93/42/EEC
  • Single use protective glove – PPE category III (protection against chemical substances for limited time*) as set out in PPE Regulation (EU) 2016/425 

 

*Please note that all Sempermed products must be used in accordance with the Sempermed chemical resistance and the respective declaration of conformity.

Failure to observe this information, in particular with regard to chemical resistance, frequency of use and tolerability of the gloves, can result in personal injury and/or material damage. Semperit is not liable for incorrect use of the gloves nor will Semperit be liable for improper storage and handling. In case of indications of damage or unusual signs of wear and tear to the gloves, the gloves should not be used. In case of any doubt, expert advice should be sought before use. This information and classification is up to date as of the date of the last update to this page. Technical details are average values from production and may vary in individual cases. This disclaimer is subject to mistakes, printing errors and amendments.

 

To the main navigation
Back to Surgical Gloves