sempercare® nitrile sterile
FEEL YOUR STERILE SAFETY: This thick sterile examination glove is made from 100% nitrile. The snythetic, powder-free product is an alternative for people with Type I allergies.
Description
The sempercare® nitrile sterile is the synthetic alternative for people with type I allergies. With regard to sensitivity, fit and grip they are very close to natural latex gloves.
Benefits
- Good chemical resistance.
- Finger textured for secure grip.
- Suitable for specific cytostatics.
Specifications
Type
Powder-free sterile examination and disposable protective glove
Material
Nitrile Butadiene Rubber (NBR)
Internal finish
Powder-free
Glove surface
Finger textured
Colour
Ocean blue
Glove Shape
Flat with rolled rim, ambidextrous
Size
Overall length as per EN 455-2
S, M, L, XL median 240 mm
Wall thickness
Measured in double layer in the palm area
min. 0.16 mm
typical 0.20 mm
Barrier performance
Tightness as per EN 455-1
AQL 1.5
Force at break
as per EN 455-2
median ≥ 6 Newton
Durability
in original packaging if stored as per ISO 2230
3 years
Sterilisation
Irradiation
Labeling & CONFORMITY TO STANDARDS
EN ISO 21420, EN ISO 374-1, EN ISO 374-2, EN 16523-1, EN ISO 374-4, EN ISO 374-5, EN 421, EN 455-1, EN 455-2, EN 455-3, ISO 2859-1, ASTM D6319, ASTM F1671, EN 556-1
Packaging
Each pair with folded cuff in foil peel pack with lashes for easy handling; tightness statistically checked according to ISO 11607-1
50 pairs / dispenser S, M, L, XL
300 pairs / transport carton S, M, L, XL
INTENDED PURPOSE
*Please note that all Sempermed products must be used in accordance with the Sempermed chemical resistance and the respective declaration of conformity. Failure to observe this information, in particular with regard to chemical resistance, frequency of use and tolerability of the gloves, can result in personal injury and/or material damage. Sempermed is not liable for incorrect use of the gloves nor will Sempermed be liable for improper storage and handling. In case of indications of damage or unusual signs of wear and tear to the gloves, the gloves should not be used. In case of any doubt, expert advice should be sought before use. This information and classification is up to date as of the date of the last update to this page. Technical details are average values from production and may vary in individual cases. This disclaimer is subject to mistakes, printing errors and amendments. This product contains accelerators of Dithiocarbamate types and Zinc-mercaptobenzothiazol. These products should not be used if hypersensitivity of these substances exists. For further information, a list of substances contained in the glove is available upon request. |
